Electrix Tweaker Manuel d'utilisateur télécharger pdf (Page 6)

1. Getting Started

The TWEAKER enclosure was designed to keep overlays in place with minimal movement during

performances.

1.6 Firmware & Utilities

The TWEAKER’s rmware updates via USB. Firmware updates may become available from time to

time. Visit www.electrixpro.com to register your product and sign up to receive TWEAKER updates.

1.6.1 Checking Current Firmware Version

You can check your current rmware version at any time by holding the three buttons down

indicated on the image below, simultaneously:

While these three buttons are held down, the rmware version will be indicated on the bottom

encoder LED rings on both mixer channels. The left LED ring indicates the number before the

decimal point, and the right LED ring indicates the number after the decimal point. For example,

to indicate version 4.3, four LED’s will light up on the left ring, and three LED’s will light up on the

right ring.

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

Pas de commentaire

Electrix Tweaker Manuel d'utilisateur Page 6