Electrix Repeater Manuel d'utilisateur télécharger pdf (Page 8)

English... 8

FRONT PANEL

9 1 0

1 1

1 2

1 4

1 5

1 6

1 7

Input Level - controls the input level to Repeater.

Set this control so that the input level indicator is

Orange most of the time, and rarely clips (goes red).

Instrument Input - a high-impedance input opti-

mized for instrument level sources. When a cable is

plugged into this input, the rear inputs are disabled.

Loop - selects the current loop.

Trim - allows the length of a loop to be modified

either by bar or in 1/100ths of a second. This is use-

ful for trimming an 8-bar loop down to 4 or for over-

riding the LPAª function to manually trim the loop.

See LOOP EDITING for details.

Multiply Loop - lets you multiply out your loop.

With Multiply Loop, you can overdub an eight bar

progression over a 1 bar drum loop. See LOOP EDIT-

ING for details.

Repeater's Display indicates the status of four crucial

parameters:

Loop - shows the current loop number (internal

memory loops have a little ' in front of the number)

Bar - when stopped, the bar display shows the loop

length (in bars). During an initial record it shows esti-

mated beats. While playing or overdubbing this dis-

play shows the current bar.

Beat/Div - shows the time signature of the current

loop while stopped, and counts beats while in Play or

Record.

BPM - indicates the current tempo (Beats Per Minute)

Compact Flash Card Slot - insert a Type 1 CFC here.

The CFC is slotted so that the card can only be

plugged in right side up. Check our website for CFCs

that will work. On the first insertion, Repeater will

format the CFC for you. See FILE MANAGEMENT for

more information.

UNDO/ Erase - a single press will UNDO the last

operation or overdub. Pressing and holding will put

you in the ERASE mode, where tracks or the entire

loop can be selected for erasing.

Copy - makes a duplicate of the current loop in any

available loop location. Copy can be used to make

multiple revisions on a single bed, or to copy materi-

al stored internally to the CFC. Press and hold COPY

to see remaining record time.

Overdub - sets Repeater's record mode. When the

Overdub indicator is lit, the recording will be mixed

together with any existing material on a given track.

Alternatively Replace mode is available to replace the

content of the selected track when recording is

engaged. Replace mode is active when the Overdub

indicator is off. See RECORDING LOOPS for details.

Reverse - reverses the direction for both Recording

and Playback. See RECORDING LOOPS for details.

Stop - stops playback or record operations.

Sleep Mode - press Reverse and Stop at the

same time and hold for 3 seconds to enter the ener-

gy saving sleep mode. You will not lose any of the

data stored in internal or external memory. To revive

press any button.

1 3

1 0

1 1

1 2

1 3

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Electrix Repeater Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Electrix Repeater